Shenzhen Rona Intelligent Technology Co., Ltd
Shenzhen RONA Intelligent Technology Co., Ltd RONA Intelligent Technology Co., Limited
Add to Cart
Model: RNCF21238Y Single Lane Full Height Turnstile
Functions & Features
1. Compatible with several control devices IC, ID, magcard, bar code
2. Unlocking is quick and reliable.
3. Several working modes are optional, namely two-direction card reading for limiting flow capacities, or, one passage works while another is set to forbid passing, or, one passage normally operates while another is free to pass.
4. Automatically reset function: It will automatically lock if the pedestrian hasn't pass through the channel in the pre-set time after the opening. The passing time is adjustable.
5. The centre rotor will be set free (default) or locked (optional) automatically when the power is off.
6. Emergency-escape function: The centre rotor will be set free automatically by pressing the emergency button which can be remote controlled whether the power is on or off.
7. Counting Function of the controller, LED figure display function (optional)
8. Memory Function attached in the controller
9. With standard input, output interface.
TECHNICAL SPECIFICATIONS:
| Technical parameters | |
| Housing material | 304 stainless steel |
| Dimensions | ɸ1500mm*H2200mm |
| Maximum Passage Width | 600mm |
| Power Supply | AC220V±10%,50HZ |
| Motor Voltage | DC24V |
| Flap opening/closing time | 0.2s |
| MCBF | 5 million cycles |
| Transit speed | 35 persons/min |
| Operating environment | Indoor/outdoor (Shelter) |
| Operating temperature | -30°C ~ 60°C |
| Operating humidity | ≤95% no condensation |
APPLICATIONS:
The Full Height Turnstile can be widely used in some high security places, typical areas of application are: prison, stadium, parking system area , and so on.
STANDARD FEATURES & FUNCTIONS:
> The turnstile system can easily integrates with the 3rd party equipment, such as Biometric reader,consumption system, ESD system and access control system etc, Rapid identification technique, available to identify accurately and efficiently the magnetic card, bar code card, ID/IC card etc.
> Operation model: Both directions can be set as controlled mode or free mode, two or one direction can be controlled by switch- button or access controller.
> Available with 3-arm, 120 degree spacing (default) or 4-arm, 90 degree spacing (optional).
> Anti backup function: to prevent reverse rotation once the mechanism has move 60 degree from home.
> The running status of device can be set up through pressing the built-in small keyboard of the main control board.
> When power off, the center rotor will be set free model (default) or be locked model (optional).
> Emergency-escape function: the center rotor will be set free automatically by pressing the emergency button which can be remote-controlled whether the power is on or not.
> Reset automatically function: Go signal will be cancelled if passage through is not completed within pre-set time. The standard default is 10 seconds (time adjustable by changing parameter of main control board).
> Remote control and management function: Through the management computer to realize remote control and management.
OPTIONAL & CUSTOMIZED FUNCTIONS:
> Alternative Materials, Finishes and Custom Design
> Usage LED Counter function
> Audio and visual alarm in the event of an invalid entry or exit and tailgating
> Access Control System Integration
> Camera System Integration
> Thermostat System Integration
OPERATION MODELS:
The turnstile provides bi-directional access control. Each direction may be in one of three states:
> Free passage: all person are authorized to pass under all conditions
> Controlled access: each person must use a card reader before being authorized to pass
> Lane closed: no persons are authorized to pass, and security cards are ignored
DIMESNION SPECIFICATIONS:
PROJECTS:
WORKSHOP: