-> The RNCF H8008-5 luxury speed gate pursues a combination of artistic and modern elements, and it is very ideal for elegant location.
-> The luxury speed gate has a wide passage width to accomodate pedestrians, users with luggage or -> -> package and bicycles.
-> The luxury speed gate integrates machinery, electronics, microprocessor control and a variety of identification technologies, conveniently compatible with access control systems, barcode cards and biometric equipment.
-> The luxury speed gate provides a high level of security and high capacity by adopting reliable security protection devices, alarm devices, direction indicators etc.

STANDARD FEATURES & FUNCTIONS:

(1). Operation model: Both directions can be set as controlled mode or free mode.
(2). NO mode & NC mode can be switched over by users easily & freely.
(3). Tailgating-detection function.
(4). Intruding-alarm function.
(5). Delayed reset automatically function.
(6). Anti-pinch function: protection against finger entrapment and personal injury.
(7). Emergency-escape function: the gates will open automatically by pressing the emergency button which can be remote-controlled whether the power is on or off.
(8). With interface of relay switch (the dry contact signal or +12V electrical level signal or DC12V pulse signal of pulse width ≥ 100ms, driving current ≥ 10mA), compatible with all kinds of access controllers.
(9). Equipped with free control software for machine interface & control command SDK.

SPECIFICATIONS:

Framework	304# Stainless Steel (default), 201# or 316# Stainless Steel or paint (optional)
Thickness of ply	1.7mm
Finish	brushed surface, polishing surface
Shell's size (LWH)	Φ141mm*H1005mm (default)
Swing arm material	Tempered glass or Acrylic (optional)
Stretching out swing length	260mm~600mm
The inductive card reader dimension	equipped with the standard mounting brackets or tailor.
Machine center	Germany technological motor
Power voltage	AC220V±10%, 50Hz±10%
Driver motor	DC36 servo motor
Main-board voltage	12V DC
In-built Infrared	6 pairs/passageway
Passing speed in normally open mode	50 persons/min
Passing speed in normally closed mode	40 persons/min
Passage Width	600mm
Swing arm transmission angle	180°
Swinging direction	unidirectional or bi-directional
Opening / closing time	0.1 seconds
The time required to running state after power on	3 seconds
Automatic reset time after the failure	1 seconds
Mean time to failure	min. 5 000 000
Operation temperature	-10℃ ~ +70℃
Relative humidity	less than 95% not condensed
Working Environment	Indoor/Outdoor (with rain-tent cover)
Input port	relay dry contact signal; +12V level signal, pulse width >100ms, DC12V pulse signal
Communications port	RS232/ RS485 electric standard, communications range ≤1200m. Available to connect with external CAN BUS and Ethernet

APPLICATIONS:

Typical areas of application are: Government Facilities, Corporate Lobbies, Buildings, Banks, Hotel, Super market, Park, Building Sites, Museums and Retail outlets etc.

PROJECTS:

FACTORY:

EXHIBITION:

Product Tags:

access control turnstile gate

turnstile gate access control

automatic swing gate installation

Inquiry Cart 0