Shenzhen Rona Intelligent Technology Co., Ltd
Shenzhen RONA Intelligent Technology Co., Ltd RONA Intelligent Technology Co., Limited
Add to Cart
Swing gate turnstile is the combination of machinery, electronic, CPU control and variety of personal authentication identification technology. IC card, ID card, code bar, and fingerprint identification unit are compatible with the flap barrier.
| Framework | 304# Stainless Steel (default), 201# or 316# Stainless Steel or paint (optional) |
| Finish | brushed surface, polishing surface |
| Swing arm material | Tempered glass or Acrylic (optional) |
| Power voltage | AC220V±10%, 50Hz±10% |
| Driver motor | DC36 servo motor |
| Main-board voltage | 12V DC |
| In-built Infrared | 6 pairs/passageway |
| Passing speed in normally open mode | 40 persons/min |
| Passing speed in normally closed mode | 25-30 persons/min |
| Passage Width | 550-1000mm |
| Swing arm transmission angle | 180° |
| Swinging direction | unidirectional or bi-directional |
| Opening / closing time | 0.1 seconds |
| The time required to running state after power on | 3 seconds |
| Automatic reset time after the failure | 1 seconds |
| Mean time to failure | min. 10 000 000 |
| Operation temperature | -10℃ ~ +70℃ |
| Relative humidity | less than 90% not condensed |
| Working Environment | Indoor/Outdoor (with rain-tent cover) |
| Input port | relay dry contact signal; +12V level signal, pulse width >100ms, DC12V pulse signal |
| Communications port | RS232/ RS485 electric standard, communications range ≤1200m. Available to connect with external CAN BUS and Ethernet |